Publications

Karve, P., S. Miele, K. Neal, S. Mahadevan, V. Agarwal, E.R. Giannini, and P. Kyslinger, (2020), “Vibro-acoustic modulation and data fusion for localizing alkali-silica reaction-induced damage in concrete,” Structural Health Monitoring, DOI: 10.1177/1475921729095509

Shah, R.U., M.M. Coggon, G. Gkatzelis, B. McDonald, A. Tasoglou, H. Huber, J.B. Gilman, C. Warneke, A.L. Robinson, and A.A. Presto, (2019), “Urban oxidation flow reactor measurements reveal significant secondary organic aerosol contributions from volatile emissions of emerging importance,” Environ. Sci. Technol. https://doi.org/10.1021/acs.est.9b06531

Deschenes, R., C. Jones, E. Giannini, M. Hale, “A Modified Index to Predict Fly Ash Dosage for Mitigating Alkali-Silica Reaction,” Advances in Civil Engineering Materials, V. 8(1), 2019, DOI 10.1520/ACEM20190191

Lupoi, J.S., P.C. Hackley, E. Birsic, L.P. Fritz, L. Solotky, A. Weislogel and S. Schlaegel, (2019). “Quantitative evaluation of vitrinite reflectance in shale using Raman spectroscopy and multivariate analysis,” Fuel, 254, 115573.

Lupoi, J.S., L.P. Fritz, P.C. Hackley, L. Solotky, A. Weislogel and S. Schlaegle, (2019). “Quantitative evaluation of vitrinite reflectance and atomic O/C in coal using Raman spectroscopy and multivariate analysis,” Fuel, 230, pp. 1-8.

Reisinger, A.J., A.C. Miller, L.A. Shaw, J.L. Champion, M.A. Neiswonger, “Oral Cavity Fluid as an Investigative Approach for Qualitative and Quantitative Evaluations of Drugs in Postmortem Subjects”, Journal of Analytical Toxicology, May 2019. DOI: 10.1093/jat/bkz032

Miele, S., Y. Bao, P. Karve, S. Mahadevan, V. Agarwal, E. Giannini, J. Zhu, (2019), “Vibration-Based Techniques for Concrete Structural Health Monitoring,” INL/EXT-19-5324, DOI: 10.2172/1546748

Hefferan, C.M., M. Deible, M.J. Perricone, and K.E. Wagner, “Grain Boundary Corrosion of Alloy C-276 using Orientation Imaging via Electron Backscatter Diffraction Microscopy (EBSD)”. Paper C2019-13418. Recent Experiences with Nickel, Titanium, Zirconium and other Corrosion Resistance Alloys. CORROSION 2019. Nashville, TN. March 2019.

Perricone, M.J., M. Deible, K.E. Wagner, and C.M. Hefferan, “Sensitization Behavior of Alloy C-276 as a Function of Mu Precipitation”. Paper C2019-13421. Recent Experiences with Nickel, Titanium, Zirconium and other Corrosion Resistance Alloys. CORROSION 2019. Nashville, TN. March 2019.

Kennedy, S.K., A.M. Dalley, and G.J. Kotyk, “Additive Manufacturing: Assessing Metal Powder Quality Through Characterizing Feedstock and Contaminants”, Journal of Materials Engineering and Performance, Vol. 28(2), pp. 728-740, 2019, DOI: 10.1007/s11665-018-3841-5.

Deschenes, R.A., E.R. Giannini, T. Drimalas, B. Fournier, W.M. Hale, “Mitigating Alkali-Silica Reaction and Freezing and Thawing in Concrete Pavement by Silane Treatment”, ACI Materials Journal, V. 115(5), pp. 685-694, 2018. DOI: 10.14359/51702345.

Tasoglou, A., R. Subramanian and S.N. Pandis, “An Inter-comparison of Black Carbon Related Instruments In a Laboratory Study of Biomass Burning Aerosol”, Aerosol Science and Technology, 2018. DOI: 10.1080/02786826.2018.1515473

Deschenes, R.A., E.R. Giannini, T. Drimalas, B. Fournier, and W.M. Hale, “Effects of Moisture, Temperature, and Freezing and Thawing on Alkali-Silica Reaction”, ACI Materials Journal, Vol. 115(4), pp. 575-584, 2018. DOI: 10.14359/5170219.

Burkett, S.L, S. Gerster,  T.J. Freeborn, E.R. Giannini, R.M. Frazier, D.M. McCallum, G. Quenneville, “Renewable Resources: Theme with Broad Societal Impact for REU Students,” ASEE Annual Conference, 2018.

Wang, F., M.J. Deible, K.D. Jordan, “Benchmark Study of the Interaction Energy of An (H₂O)₁₆ Cluster: Quantum Monte Carlo and Complete Basis Set Limit MP2 Results,” J. Phys. Chem. A, 2013, 117 (32), 7606.

Hayes, N.W., Q. Gui, A. Abd-Elssamd, Y. Le Pape, A.B. Giorla, S. Le Pape, E.R. Giannini and Z.J. Ma, “Monitoring Alkali-Silica Reaction Significance in Nuclear Concrete Structural Members”,  Journal of Advanced Concrete Technology, Vol.  16 (4), pp. 179-190, 2018. DOI: 10.3151/jact.16.179

Wood, S.G., E.R. Giannini, M.A. Ramsey and R.D. Moser, “Autoclave Test Parameters for Determining Alkali-Silica Reactivity of Concrete Aggregates”, Elsevier: Construction & Building Materials, Vol.  168(1), pp. 683-691, 2018. DOI: 10.1016/jact.02.114

Mahadevan, S., S. Miele, P. Karve, J. Finfrock, V. Agarwal, E. Giannini, ” Enhancement of the Structural Health Monitorng Framework by Optimizing Vibro-Acoustic Modulation Technique to Localize Alkali-Silica Reaction Degradation in Medium-Sized Concrete Samples”, Prepared for The U.S. Department of Energy, April 2018. DOI: 10.2172/1495181

Li, Y., A. Tasoglou, A. Liangou, K.P. Cain, L. Jahn, P. Gu, E. Kostenidou and S.N. Pandis, “Cloud Condensation Nuclei Activity and Hygroscopicity of Fresh and Aged Cooking Organic Aerosol”,  Atmospheric Environment Journal, Vol.  176(1), pp. 103-109, 2018. DOI: 10.1016/j.atmosenv.2017.11.035

Giannini, E.R., L.F.M. Sanchez, A. Tuinukuafe, and K.J. Folliard, “Characterization of Concrete Affected by Delayed Ettringite Formation Using the Stiffness Damage Test”,  Elsevier: Construction & Building Materials, Vol. 162(1)  253-264, 2018. DOI: 10.1016/j.conbuildmat.2017.12.012

Abelmann, A., J.R. Maskrey, J.T. Lotter, A.M. Chapman, M.D. Nembard, J.S. Pierce, J.M. Wilmoth, R.J. Lee and D.J. Paustenbach, “Evaluation of Take-Home Exposure to Asbestos from Handling Asbestos-Contaminated Worker Clothing Following the Abrasive Sawing of Cement Pipe”,  Inhalation Toxicology, Vol.  29(12-14), pp. 555-566, 2018. DOI: 10.1080/08958378.2017.1418940

Kurtis, K.E., Y. Xi, M.A. Glinicki, J.J. Provis, E.R. Giannini and T. Fu, Can We Design Concrete to Survive Nuclear Environments,  Concrete International, Vol. 39(11), pp. 29-35, 2017.

Wood, S.G., E.R. Giannini, A.F. Bentivegna, H. Rashidian-Dezfouli, P.R. Rangaraju, T. Drimalas, M.A. Ramsey, T.R. Johnson and R.D. Moser, “Five-Hour Autoclave Test for Determining Potential Alkali-Silica Reactivity of Concrete Aggregates: A Multi-Laboratory Study”,  Advances in Civil Engineering Materials, Vol. 6(1), pp. 550–563, 2017. doi: 10.1520/ACEM20170061

Lupoi, J.S., L.P. Fritz, T.M. Parris, P.C. Hackley, L. Solotky, C.F. Eble and S. Schlaegle, “Assessment of Thermal Maturity Trends in Devonian-Mississippian Source Rocks Using Raman Spectroscopy: Limitations of Peak-Fitting Method”,  Frontiers in Energy Research, Vol. 5(24), pp. 1-20, 2017. DOI: 10.3389/fenrg.2017.00024

Yunchao, L., Y. Cheng, L. Daemen, G.M. Veith, A.M. Levine, R.J. Lee, S.M. Mahurin, S. Dai, A.K. Naskar, M.P. Paranthaman, “Neutron Vibrational Spectroscopic Studies of Novel Tire-Derived Carbon Materials”, Royal Society of Chemistry., Physical Chemistry Chemical Physics, Vol. 19(33), pp. 1-7, 2017. DOI: 10.1039/C7CP03750C

Tasoglou, A., G. Saliba, R. Subramanian, and S.N. Pandis, “Absorption of chemically aged biomass burning carbonaceous aerosol”,  Journal of Aerosol Science, Vol. 113(1), pp. 141-152, 2017. DOI: 10.1016/j.jaerosci.2017.07.011

Bishop, L., L. Cena, M. Orandle, N. Yanamala, M.M. Dahm, M.E. Birch, D.E. Evans, V.K. Kodali, T. Eye, L. Battelli, P.C. Zeidler-Erdely, G. Casuccio, K. Bunker, J.S. Lupoi, T.L. Lersch, A.B.  Stefaniak, T. Sager, A. Afshari, D. Schwegler-Berry, S. Friend, J. Kang, K.J. Siegrist, C.A. Mitchell, D.T. Lowry, M.L. Kashon, R.R. Mercer, C.L. Geraci, M.K. Schubauer-Berigan, L.M. Sargent,  A. Erdely, “In Vivo Toxicity Assessment of Occupational Components of the Carbon Nanotube Life Cycle To Provide Context to Potential Health Effects“, ACS Nano, Vol. 11(9), pp. 8849-8863, July 2017. DOI:10.1021/acsnano.7b03038

McGrath, M., Constraints on the Petrogenesis of a Proterozoic Talc Deposit in Southwestern Montana: A Petrological and Geochemical Study, Master’s Thesis, University of Pittsburgh, 2017.

Lentz, H.P., M.S. Potter and G.S. Casuccio, Detection Measurement and Characterization of Inclusions Using Automated SEM Techniques,  AISTech Proceedings, pp. 1-13, 2017.

Yunchao, L., R.A. Adams, A. Arora, V.G. Pol, A.M. Levine, R.J. Lee, K. Akato, A.K. Naskar and M.P. Paranthaman, “Sustainable Potassium-Ion Battery Anodes Derived from Waste-Tire Rubber”,  Journal of the Electrochemical Society, Vol. 164(6), pp. A1234-A1238, 2017. DOI: 10.1149/2.1391706jes

Kang, J., A. Erdely, A. Afshari, G. Casuccio, K. Bunker, T. Lersch, M.M. Dahm, D. Farcas and L. Cena, “Generation and characterization of aerosols released from sanding composite nanomaterials containing carbon nanotubes”,  NanoImpact, Vol. 5(1), pp. 41 – 50, 2016. DOI: 10.1016/j.impact.2016.12.006

Saliba G., R.Subramanian, R. Saleh, A.T. Ahern, E. Lipsky, A. Tasoglou, R.C. Sullivan, J. Bhandari, C. Mazzoleni and A.L. Robinson, “Optical Properties of Black Carbon in Cookstove Emissions Coated with Secondary Organic Aerosols: Measurements and Modeling”,  Aerosol Sci. Technology, Vol.  50(11), pp. 1264 – 1276, 2016. DOI: 10.1080/02786826.2016.1225947

Deible, M.J., M. Kessler, K. E. Gasperich, K. D. Jordan, “Quantum Monte Carlo calculation of the binding energy of the beryllium dimer,” J. Chem. Phys., 2015, 143 (8), 084116.

Peters T.M., E.J.Sawvel, R. Willis, R.R. West and G.S. Casuccio, “Performance of Passive Samplers Analyzed by Computer-Controlled Scanning Electron Microscopy to Measure PM10–2.5”,   Environmental Science & Technology, Vol.  50 (14), pp. 7581-7589, 2016. DOI: 10.1021/acs.est.6b01105

Ozturk, T., C. Stein, R. Pokharel, C. Hefferan, H. Tucker, S. Jha, R. John, R.A. Lebensohn, P. Kenesel, R.M. Suter and A.D. Rollett, “Simulation domain size requirements for elastic response of 3D polycrystalline materials”, Modelling Sim. Mater. Sci. Eng., Vol. 24, 2016. DOI: 10.1088/0965-0393/24/1/015006

Shen H., T.M.Peters, G.S. Casuccio, T.L. Lersch, R.R. West, A. Kumar, N. Kumar and A.P. Ault, “Elevated Concentrations of Lead in Particulate Matter on the Neighborhood-Scale in Delhi, India As Determined by Single Particle Analysis”,  Environ. Sci. Technol, Vol.  50 (10), pp. 4961–4970, 2016. DOI: 10.1021/acs.est.5b06202

Ilgren, E.B., D.R. Van Orden, R.J. Lee, Y.M. Kamiya and J.A. Hoskins, “Further Studies of Bolivian Crocidolite –Part IV: Fibre Width Fibre Drift and their relation to Mesothelioma Induction: Preliminary Findings” , Epidemiology Biostatistics and Public Health, Vol.  12(2), 2016. DOI: 10.2427/11167

Alexander, R., M. Altamirano, S. Batdorj, M. Brooks, P. Brun, A. Del Angel, A. de la Rosa, C. Brewer, and M. Deible, “System for Corrosion Inspection and Monitoring,” Ind. and Sys. Eng. Rev., 2016, 4(2), 82.

Huerta, N.J., M.A. Hesse, S.L. Bryant, B.R. Strazisar and C.L. Lopano, “Reactive transport of CO2-saturated water in a cement fracture: Application to wellbore leakage during geologic CO2 storage”,  International Journal of Greenhouse Gas Control, Vol. 44(1), pp. 276-289, 2016. DOI: 10.1016/j.ijggc.2015.02.006

Cerrone, A., C. Stein, R. Pokharel, C. Hefferan, J. Lind, H. Tucker, R. Suter, A. Rollett and A. Ingraffea, “Implementation and Verification of a Microstructure-based Capability for Modeling Microcrack Nucleation in LSHR at Room Temperature”,  Modelling Simul. Mater. Sci. Eng., Vol. 23, 2015.

McGrath, M., L. Li, M.S. Sanchez, D.R. Van Orden, R.J. Lee, Characterization of Structurally Coherent Mineral Intergrowths in Cosmetic Talc, 2015 GSA Annual Meeting Baltimore, MD., Geological Society of America, Vol. 47, pp. 759, 2015.

Tasoglou, A. and S.N. Pandis, “Formation and chemical aging of secondary organic aerosol during the β-caryophyllene oxidation” ,  Atmospheric Chemistry and Physics, Vol.  14(21), pp. 6035-6046, 2015. DOI: 10.5194/acpd-14-28919-2014

Crooks, A.B., Y. Kuang-Hway, L. Li, J.C. Yang and S. Özkar, “Unintuitive Inverse Dependence of the Apparent Turnover Frequency on Precatalyst Concentration: A Quantitative Explanation in the Case of Ziegler-Type Nanoparticle Catalysts Made from [(15-COD)Ir(μ-O2C8H15)]2and AlEt3“, ACS Catalysis, Vol. 5(6), pp. 3342-3353, 2015. DOI: 10.1021/acscatal.5b00347

Sahmel J., C.A. Barlow, S. Gaffney, H.J. Avens, A.K. Madl, J. Henshaw, K.M. Unice, D. Galbraith, G. DeRose, R.J. Lee, D. Van Orden, M. Sanchez, M. Zock, D.J. Paustenbach, “Airborne Asbestos Take-home Exposures During Handling of Chrysotile-contaminated Clothing Following Simulated Full Shift Workplace Exposures,” Journal of Exposure Science and Environmental, Vol. 26(1), pp. 48-62, April 2015. DOI: 10.1038/jes.2015.15

Gantt B., S. Hoque, K.M. Fahey, R.D. Willis, J.M. Delgado-Saborit, R.M. Harrison, K.M. Zhang, D.A. Jefferson, M. Kalberer, K.L. Bunker, J.M. Conny, P.V. Bhave, J.P. Weinstein, and H.O.T. Pye, “Factors Affecting the Ambient Physicochemical Properties of Cerium-Containing Particles Generated by Nanoparticle Diesel Fuel Additive Use”, Aerosol Science and Technology, Vol. 49(6), pp. 371-380, 2015. DOI: 10.1080/02786826.2015.1027809

Sawvel E.J., R.Willis, R.R. West, G.S. Casuccio, G. Norris, N. Kumar, D. Hammond and T.M. Peters, “Passive sampling to capture the spatial variability of coarse particles by composition in Cleveland, OH”,  Atmospheric Environment, Vol.  105(1), pp. 61-69, 2015. DOI: 10.1016/j.atmosenv.2015.01.030

Huerta, N.J., B.R. Strazisar, S.L. Bryant and M.A. Hesse, “Time-dependent Fluid Migration From a Storage Formation via Leaky Wells” , Energy Procedia, Vol.  63(1), pp. 5724-5736, 2014. DOI: 10.1016/j.egypro.2014.11

Hefferan, C.M., S.F. Li, J. Lind, R. Pokharel, U. Lienert, A.D. Rollett and R.M. Suter, “The Population of Twin Related Boundaries in High Purity Nickel as measured with near-field High Energy X-ray Diffraction Microscopy”, 8th International Symposium on Superalloy 718 and Derivatives, 2014. DOI: 10.1002/9781119016854

Pirela, S.V., G.A. Sotiriou, D. Bello, M. Shafer, K.L. Bunker, V. Castranova, T. Thomas and P. Demokritou, “Consumer exposures to laser printer-emitted nanoparticles: A case study of the life-cycle implications from nano-enabled products”, Nanotoxicology, Vol.  9(6), pp. 760-768, 2014. DOI: 10.3109/17435390.2014.976602

Bandli , B.R. and M.E. Gunter, “Scanning Electron Microscopy and Transmitted Electron Backscatter Diffraction Examination of Asbestos Standard Reference Materials, Amphibole Particles of Differing Morphology, and Particle Phase Discrimination from Talc Ores”, Microscopy and Microanalysis, Vol. 20(6), pp. 1805-1816, 2014. DOI: 10.1017/S1431927614013415

Wolfe , J. and K. Smith, “Forensics in QbD: Addressing Foreign Particulate Matter Investigations”, American Pharmaceutical Review, 2014.

Stein C.A., A. Cerrone, T. Ozturk, S. Lee, P. Kenesei, H. Tucker, R. Pokharel, J. Lind, C. Hefferan, R.M. Suter, A.R. Ingraffea, A.D. Rollett, “Fatigue crack initiation, slip localization and twin boundaries in a nickel-based superalloy”, Current Opinion in Solid State and Materials Science, Vol. 18(4), pp. 244-252, 2014. DOI: 10.1016/j.cossms.2014.06.001

Zhang, L., D.A. Dzombak, D.V. Nakles, S.B. Hawthorne, D.J. Miller, B. Kutchko, C. Lopano and B. Strazisar, “Effect of exposure environment on the interactions between acid gas (H2S and CO2) and pozzolan-amended wellbore cement under acid gas co-sequestration conditions”,  International Journal of Greenhouse Gas Control, Vol.  27(1), pp. 309-318, 2014. DOI: 10.1016/j.ijggc.2014.06.030

Zhang, L., D.A. Dzombak, D.V. Nakles, S.B. Hawthorne, D.J. Miller, B.G. Kutchko, C.L. Lopano and B.R. Strazisar, “Rate of H2S and CO2 attack on pozzolan-amended Class H well cement under geologic sequestration conditions” , International Journal of Greenhouse Gas Control, Vol.  27(1), pp. 299-308, 2014. DOI: 10.1016/j.ijggc.2014.02.013

Wagner , J. and G. Casuccio, “Spectral imaging and Passive Sampling to Investigate Particle Sources in Urban Desert Regions”,  Environmental Science: Processes Impacts, Vol. 16(7), pp. 1745-1753, 2014. DOI: 10.1039/C4EM00123K

M.J. Deible, O. Tuguldur, K.D. Jordan, “Theoretical Study of the Binding Energy of a Methane Molecule in a (H₂O)₂₀ Dodecahedral Cage,” J. Phys. Chem B, 2014, 118 (28), 8257.

Ilgren, E.B., D.V. Orden, R. Lee, Y. Kamiya and J.A. Hoskins, “Environmental ‘Low Dose’ Mesotheliomas and Their Relationship to Domestic Exposures”,  Environment and Pollution, Vol. 3(2), pp. 1-7, 2014. DOI: 10.5539/ep.v3n2p48

Sahmel, J., C.A. Barlow, B. Simmons, S.H. Gaffney, H.J. Avens, A.K. Madl, J. Henshaw, R.J. Lee, D. Van Orden, M. Sanchez, M. Zock, D.J. Paustenbach, “Evaluation of Take-Home Exposure and Risk Associated with the Handling of Clothing Contaminated with Chrysotile Asbestos”, Risk Analysis, Vol. 34(8), pp. 1448-1468, 2014. DOI: 10.1111/risa.12174

Brown, D.W., L. Balogh, D. Byler, C. M. Hefferan, J. Hunter, P. Kenesei, S. F. Li, J. Lind, S. Niezgoda and R. Suter, “Demonstration of near Field High Energy X-Ray Diffraction Microscopy on High-Z Ceramic Nuclear Fuel Material” , Material Science Forum, Vol.  777(1), pp. 112-117, 2014. DOI: 10.4028/www.scientific.net/MSF.777.112

Siegrist K.J., S.H. Reynolds, M.L. Kashon, D.T. Lowry, C. Dong, A.F. Hubbs, S.H. Young, J.L. Salisbury, D.W. Porter, S.A. Benkovic, M. McCawley, M.J. Keane, J.T. Mastovich, K.L. Bunker, L.G. Cena, M.C. Sparrow, J.L. Sturgeon, C.Z. Dinu, L.M. Sargent, “Genotoxicity of multi-walled carbon nanotubes at occupationally relevant doses”, Particle and Fibre Toxicology, Vol. 11(6), pp. 1-15, 2014. DOI: 10.1186/1743-8977-11-6

Williams, C., L. Dell, R. Adams, T. Rose and D. Van Orden, “State-of-the-science assessment of non-asbestos amphibole exposure: Is there a cancer risk?”, Environmental Geochemistry and Health 35, Vol. 3, pp. 357-77, 2013. DOI: 10.1007/s10653-012-9500-0

Pikridas, M., A. Tasoglou, K. Florou and S.N. Pandis, “Characterization of the Origin of Fine Particulate Matter In a Medium Size Urban Area In the Mediterranean”, Atmospheric Environment, Vol.  80(1), pp. 264-274, 2013. DOI: 10.1016/j.atmosenv.2013.07.070

Huerta, N.J., Q.C. Wenning, M.A. Hesse, S.L. Bryant, C.L. Lopano, and B.R. Strazisar, “Development of reacted channel during flow of CO₂ rich water along a cement fracture”, Energy Procedia, Vol. 37(1), pp. 5692-5701, 2013. DOI: 10.1016/j.egypro.2013.06.491

Leitha, D., D. Miller-Lionberga, G. Casuccio, T. Lersch, H. Lentz, A. Marchesec and J. Volckensac, “Development of a Transfer Function for a Personal Thermophoretic Nanoparticle Sampler”, Aerosol Science and Technology, Vol.  48(1), pp. 81-89, 2013. DOI: 10.1080/02786826.2013.861593

Zhang, L., D.A. Dzombak, D.V. Nakles, S.B. Hawthorne, D.J. Miller, B.G. Kutchko, C.L. Lopano and B.R. Strazisar, “Characterization of pozzolan-amended wellbore cement exposed to CO2 and H2S gas mixtures under geologic carbon storage conditions”,  International Journal of Greenhouse Gas Control, Vol.  19(1), pp. 358-368, 2013. DOI: 10.1016/j.ijggc.2013.09.004

Goodman, A., G. Bromhal, B. Strazisar, T. Rodosta, W. Guthrie, D. Allen and G. Guthrie, “Comparison of methods for geologic storage of carbon dioxide in saline formations” , International Journal of Greenhouse Gas Control, Vol.  18(1), pp. 329-342, 2013. DOI: 10.1016/j.ijggc.2013.07.016

Zhongfan , Z., L. Li and J.C. Yang, “Adhesion of Pt Nanoparticles Supported on γ-Al2O3 Single Crystal”,  The Journal of Physical Chemistry, Vol.  117(41), pp. 21407-21412, 2013. DOI: 10.1021/jp407798b

Beyene, M., A. Snyder, R.J. Lee and M. Blaszkiewicz, “Alkali Silica Reaction (ASR) as a root cause of distress in a concrete made from Alkali Carbonate Reaction (ACR) potentially susceptible aggregates”,  Cement and Concrete Research, Vol.  51(1), pp. 85–95, 2013. DOI: 10.1016/j.cemconres.2013.04.014

Li, L., L.-L. Wang, D.D. Johnson, Z. Zhang, S.I. Sanchez, J.H. Kang, R.G. Nuzzo, Q. Wang, A.I. Frenkel, J. Li, J. Ciston, E.A. Stach, and J.C. Yang, “Non-Crystalline-to-Crystalline Transformations in Pt Nanoparticles”, Journal of the American Chemical Society, Vol. 135(35), pp. 13062-13072, 2013. DOI: 10.1021/ja405497p

Kutchko , B.G., A.L. Goodman, E. Rosenbauma, S. Natesakhawat and K. Wagner, “Characterization of coal before and after supercritical CO2 exposure via feature relocation using field-emission scanning electron microscopy”,  Fuel, Vol.  107(1), pp. 777-786, 2013. DOI: 10.1016/j.fuel.2013.02.008.

Brunet, J.L., L. Li, Z.T. Karpyn, B.G. Kutchko, B. Strazisar and G. Bromhal, “Dynamic Evolution of Cement Composition and Transport Properties under Conditions Relevant to Geological Carbon Sequestration”,  Energy & Fuels, Vol.  27(8), pp. 4208-4220, 2013. DOI: 10.1021/ef302023v

Strobel, G., E. Booth, G. Schaible, M.T. Mends, J. Sears and B. Geary, “The Paleobiosphere: a novel device for the in vivo testing of hydrocarbon producing-utilizing microorganisms”, Biotechnology Letters, Vol. 35(4), pp. 539-52, 2013. DOI: 10.1007/s10529-012-1123-0

Mcgrath, M., L. Mutti, “Elaborate growth history in secondary quartz as revealed by SEM-CL mapping, Mahantango Fm., PA”, Geological Society of America, Vol. 45(1), pp. 72, 2013.

Xu, J., M.J. Deible, K.A. Peterson, K.D. Jordan, “Correlation Consistent Gaussian Basis Sets for H, B-Ne with Dirac-Fock AREP Pseudopotentials: Applications in Quantum Monte Carlo Calculations,” J. Chem. Theory Comput., 2013, 9 (5), 2170.

Wells, A., J.R. Diehl, B. Strazisar and et al., “Atmospheric and soil-gas monitoring for surface leakage at the San Juan Basin CO2pilot test site at Pump Canyon New Mexico, using perfluorocarbon tracers, CO2 soil-gas flux and soil-gas hydrocarbons”, Int. J. of Greenhouse Gas Control , Vol. 14, pp.227-238., 2013. DOI: 10.1016/j.ijggc.2012.12.021

Bandli, B.R., M.E. Gunter, “Mineral Identification Using Electron Backscatter Diffraction from Unpolished Specimens: Applications for Rapid Asbestos Identification”, The Microscope, Vol. 61(1), pp. 37-45, 2013.

Li, S.F, J.Lind, C.M. Hefferan, R. Pokharel, U. Lienert, A.D. Rollett and R.M. Suter, “Three-dimensional plastic response in polycrystalline copper via near-field high energy X-ray diffraction microscopy”, J. App. Crys., Vol. 45, pp. 1098-1108, 2012. DOI: 10.1107/S0021889812039519

Li, S.F., B.W. Reed, J.V. Bernier, M.Kumar, J.Lind, C.M. Hefferan, R.M. Suter and U. Lienert, Microstructure Geometry and Topology Tracking Using High Energy X-Ray Diffraction Microscopy, Presented at MRS 2012, 2012, Boston, MA.

Pokharel, R., A.D. Rollett, R. Lebensohn, S.F. Li, J. Lind, C.M. Hefferan, R.M. Suter and U. Lienert, Experimental Microstructure Based Elasto-Viscoplastic Simulation to Predict Localization of Plastic Deformation in Cu, Presented at MS&T 2012, 2012, Pittsburgh, PA.

Lind, J.S., F. Li, R. Pokharel, C.M. Hefferan, U. Lienert, A.D. Rollett and R.M. Suter , In-Situ Tensile Deformation of Zr Using Near-Field HEDM, Presented at MS&T 2012, 2012, Pittsburgh, PA.

Suter, R.M., S.F. Li, J. Lind, X. Tan, R. Pokharel, U. Lienert, A.D. Rollett and C.M. Hefferan, Near-field High Energy X-ray Diffraction Microscopy in Deformed Materials, Presented at MS&T 2012, 2012, Pittsburgh, PA.

Hefferan, C.M., J.Lind, S.F. Li, U. Lienert, A.D. Rollett and R.M. Suter, Recovery and Recrystallization in High Purity Aluminum Using Near-field High Energy X-ray Diffraction Microscopy, Presented at MS&T 2012, 2012, Pittsburgh, PA.

Rollett, A.D., S.F. Li, C.M. Hefferan, J. Lind, U. Lienert, G.S. Rohrer, E. Holm, S. Foiles, D. Olmsted, and R.M. Suter, Interfaces, Dynamics and Grain Boundary Character, Presented at MS&T 2012, Pittsburgh, PA, October 2012.

Hefferan, C.M., Measurement of Annealing Phenomena in High Purity Metals with Near-field High Energy X-ray Diffraction Microscopy, PhD Thesis, 2012, Carnegie Mellon University.

Beyene, M., R.J. Lee and M. Silsbee, “Floor Coating Failure: Gel found beneath a blistered coating may not always be NSAR”, Concrete Construction, 2012.

Huerta, N.J., M.A. Hesse, S.L. Bryant, B.R. Strazisar and C.L. Lopano, “Experimental Evidence for Self-Limiting Reactive Flow through a Fractured Cement Core: Implications for Time-Dependent Wellbore Leakage”, Environ. Sci. Technol., Vol. 47(1), pp. 269–275, 2012. DOI: 10.1021/es3013003

Ilgren, E., D. Van Orden, R. J. Lee, Y. Kamiya and J. Hoskins, “Further Evidence for Fiber Width as a Determinant of Mesothelioma Induction and Threshold Anthophyllite, Bolivian Crocidolite, and Cape Crocidolite”, Annals of Respiratory Medicine, 2012, Review Article.

Van Orden, D.R., R.J. Lee, M.S. Sanchez and M.D. Zock, “The Size Distribution of Airborne Bolivian Crocidolite Fibers”, Annals of Respiratory Medicine, Case Report. 2012.

Van Orden, D.R., R.J. Lee, M.S. Sanchez, M.D. Zock, E.B. Ilgren and Y. Kamiya, “Evaluation of Airborne Crocidolite Fibers at an Asbestos- Cement Plant”, Annals of Respiratory Medicine, Case Study, 2012.

Stein, C.A., S.B. Lee and A.D. Rollett, “An Analysis of Fatigue Crack Initiation Using 2D Orientation Mapping and Full-field Simulation of Elastic Stress Response”,  Superalloys 2012, The Minerals, Metals, and Materials Society, 2012.

Suter, R.M., S.F. Li, C.M. Hefferan, J. Lind, R. Pokharel, U. Lienert and A.D. Rollett, High Energy X-ray Diffraction Microscopy Microstructure Mapping, Presented at International Conference on 3D Materials Science 2012, 2012, Seven Springs, PA.

Li, S.F., J. Lind, C.M. Hefferan, A.D. Rollett and R.M. Suter, Tracking Geometrical Features using Near-field High Energy X-ray Diffraction Microscopy, Presented at International Conference on 3D Materials Science 2012, 2012, Seven Springs, PA.

Reed, B., B. L. Adams, J. Bernier, C.M. Hefferan, A. Henrie, S.F. Li, J. Lind, R. M. Suter and M. Kumar, Stereology and 3D Grain Boundary Network Analysis, Presented at International Conference on 3D Materials Science 2012, 2012, Seven Springs, PA.

Bello, D., J. Martin, C. Santeufemio, Q. Sun, K.L. Bunker, M. Shafer and P. Demokritou, Physicochemical and Morphological Characterisation of Nanoparticles from Photocopiers: Implications for Environmental Health, Nanotoxicology, Vol. 1-15, 2012.

Van Orden, D.R., M. Sanchez and J.M. Wilmoth, “Effect of Sample Preparation on Observed Airborne Fiber Characteristics”, The Microscope, Vol. 6(2), pp. 51-61, 2012.

Bunker, K.L., J. Wolfe and L. Wu, “Integrating Nanotechnology into the Life Sciences: Lessons Learned”, International Journal of Pharmaceutical Sciences and Nanotechnology, Review Article, Vol. 5(1), pp. 1583-1596, 2012.

Ault, A.P., T.M. Peters, E.J. Sawvel, G.S. Casuccio, R.D. Willis, G.A. Norris and V.H. Grassian, “Single-Particle SEM-EDX Analysis of Iron-Containing Coarse Particulate Matter in an Urban Environment: Sources and Distribution of Iron within Cleveland, Ohio”, Environmental Science & Technology, Vol. 46(8), 4331-4339, 2012. doi: 10.1021/es204006k.

Yang, Y.-M., M.J. Small, E.O. Ogretim, D.D. Gray, A.W. Wells, G.S. Bromhal and B.R. Strazisar, “A Bayesian Belief Network (BBN) for Combining Evidence from Multiple CO2 Leak Detection Technologies”, Greenhouse Gases: Science and Technology , Vol. 2(3), pp. 185–199, 2012. DOI: 10.1002/ghg.1284

Verma, N., P.C. Pistorius, R.J. Fruehan, M.S. Potter, H.G. Oltmann and E.B. Pretorius, “Calcium Modification of Spinel Inclusions in Aluminum-Killed Steel: Reaction Steps”, Metallurgical and Materials Transactions B, Vol. 43(4), pp. 830-840, 2012. doi:10.1007/s11663-012-9660-4.

Reed, B.W., B.L. Adams, J.V. Bernier, C.M. Hefferan, A. Henrie, S.F. Li, J. Lind, R.M. Suter and M. Kumar , “Experimental tests of stereological estimates of grain boundary populations”, Acta Materialia, Vol. 60(6-7), pp. 2999-3010, 2012. DOI: 10.1016/j.actamat.2012.02.005

Hefferan, C.M., S.F. Li, J. Lind, U. Lienert, A.D. Rollett and R.M. Suter , “In Situ Observation of Recovery and Grain Growth in High Purity Aluminum”, Materials Science Forum, Vol. 715, pp. 447-454, 2012. DOI: 10.4028/www.scientific.net/MSF.715-716.447

Siriwardane, H.J., B.D. Bowes, G.S. Bromhal, R.K. Gondle, A.W. Wells and B.R. Strazisar, “Modeling of CBM Production, CO2 Injection, and Tracer Movement at a Field CO2 Sequestration Site”, International Journal of Coal Geology, Vol. 96, pp. 120-136, 2012. DOI: 10.1016/j.coal.2012.02.009

Hefferan, C.M., S.F. Li, J.Lind, U.Lienert, A.D. Rollett and R.M. Suter , Grain Growth of High Purity Nickel with High Energy X-Ray Diffraction Microscopy, Presented at TMS 2012, 2012, Orlando, FL.

Li, S.F., R.M. Suter, C.M. Hefferan, J. Lind, U.Lienert, J. Bernier, M. Kumar and B. Reed, Annealing Study of Grain Boundary Engineered Copper Using High Energy X-Ray Diffraction Microscopy, Presented at TMS 2012, 2012, Orlando, FL.

Bandli, B.R. and M.E. Gunter, “Electron Backscatter Diffraction from Unpolished Particulate Specimens: Examples of Particle Identification and Application to Inhalable Mineral Particulate Identification”, American Mineralogist, Vol. 97(8-9), p. 1269-1273, 2012. DOI: 10.2138/am.2012.4155

Van Orden, D.R., J.M. Wilmoth and M. Sanchez, “Effect of Size Reduction Processes on the Apparent Fiber Content of Rock Samples”, The Microscope, Vol. 60(1), 2012.

Mlynareka, S.P. and D.R. Van Orden, “Assessment of potential asbestos exposures from jet engine overhaul work”, Regulatory Toxicology and Pharmacology, Vol. 63(1), pp. 78-83, 2012. doi: 10.1016/j.yrtph.2012.02.010.

Suter, R.M., S.F. Li, J.Lind, R.Pokharel, C.M. Hefferan, U. Lienert and A.D. Rollett , Plastic Response in Copper and Zirconium Observed by High Energy X-Ray Diffraction Microscopy Orientation Mapping at APS 1-ID, Presented at Plasticity 2012, 2012, San Juan, PR.

Kumar, P., P.K. Hopke, S. Raja, G. Casuccio, T.L. Lersch and R.R. West, “Characterization and Heterogeneity of Coarse Particles Across an Urban Area”, Atmospheric Environment, Vol. 46, pp. 449-459, 2012. DOI: 10.1016/j.atmosenv.2011.09.018.

Pokharel, R., S.F. Li, J. Lind, C.M. Hefferan, U. Lienert, R.A. Lebensohn, R.M. Suter and A.D. Rollett, “Quantifying Damage Accumulation Using State-of-The-Art FFT Method”, Materials Science Forum, Vol. 702, pp. 515-518, 2012. DOI: 10.4028/www.scientific.net/MSF.702-703.515

Yang, Y.-M., M.J. Small, J. Mitchell, E.O. Ogretim, D.D. Gray, G.S. Bromhal, B.R. Strazisar and A.W. Wells, “Probabilistic Design of a Near-Surface CO2 Leak Detection System”, Environmental Science & Technology , Vol. 45(15), pp. 6380-6387, 2011. DOI: 10.1021/es104379m

Huffman, G.P., N. Shah, N. Cprek, F.E. Huggins, G. Casuccio, E. Ramer and J.B. Hicks, “CCSEM Investigation of Respirable Quartz in Air Samples Collected during Power Plant Maintenance Activities”, Fuel, Vol. 95, pp. 365-370, 2011. doi:10.1016/j.fuel.2011.11.037.

Ramachandrana, G., M. Ostraatb, D.E. Evansc, M.M. Methnerc, P. O’Shaughnessyd, J. D’Arcye, C.L. Geracic, E. Stevensonf, A. Maynardg, K. Rickabaugh, “A Strategy for Assessing Workplace Exposures to Nanomaterials”, Journal of Occupational and Environmental Hygiene, Vol. 8(11), pp. 673 – 685. 2011. DOI: 10.1080/15459624.2011.623223

Wolfe, J., K. Smith and L. Wu, Incorporating Industrial Forensics into a Quality by Design Approach for Foreign Particulate Matter Characterization, Pharmaceutical Manufacturing, 2011.

Schiefelbein, B., Practical Aspects of Analyzing Surfaces, Chapter in “Handbook for Critical Cleaning” Second Edition, CRC Press, 2011.

Strobel, G., S.K. Singh, S. Riyaz-Ul-Hassan, A.M. Mitchell, B. Geary and and J. Sears, “An Endophytic/Pathogenic Phoma from Creosote Bush Producing Biologically Active Volatile Compounds Having Fuel Potential”, Federation of European Microbiological Societies, Vol. 320(2), pp. 87-94, 2011. DOI: 10.1111/j.1574-6968.2011.02297.

Burnett, J., B. Karuppannan, J. Brant, J. Sturgeon, K. Bunker, K. Harris, and J. Aitken, Morphology and Oxidation State Determination of Iron-Substituted CuInS2 Materials Prepared by High-Temperature Solid-State Synthesis, MS&T 2011, Columbus, OH, October 16-20, 2011 (Platform Presentation).

Rosmus, K., J. Brant, J. Sturgeon, K. Bunker, K. Harris, J. Aitken, Crystal Structure and Surface Analysis of Diamond-Like Semiconductor Single Crystals, MS&T 2011, Columbus, OH, October 16-20, 2011 (Platform Presentation).

Yang, Y.-M., M.J. Small, B. Junker, G.S. Bromhal, B. Strazisar and A. Wells, “Bayesian Hierarchical Models for Soil CO2 Flux and Leak Detection at Geologic Sequestration Sites”, Environmental Earth Sciences, Vol. 64(3), pp. 787-798, 2011. DOI: 10.1007/s12665-011-0903-5

Sargent, L.M., C.Z. Dinu, A.F. Hubbs, S.A. Benkovic, A.A. Shvedova, D.T. Lowry, M.L. Kashon, J.L. Salisbury, A. Murray, E. Kisin, K Siegrist, J. Mastovich, J. Sturgeon, K. Bunker, L. Battelli, and S.H. Reynolds, Induction of Centrosome Fragmentation, Mitotic Spindle Aberrations and Aneuploidy by Occupationally Relevant Doses of Single-Walled Carbon Nanotubes and Multi-Walled Carbon Nanotubes, Implications for Monitoring of Acutely Exposed Workers, AAAR 30th Annual Conference, Orlando, FL, October 3-7, 2011 (Platform Presentation).

Perricone, M.J., Accelerated Alloy Development: Nuclear Power Generation Technology Depends on the Reliability of High Performance Alloys to Operate in Severe Service Environments, Corrosion Solutions Conference, 2011, Lake Louise, Alberta, Canada.

Perricone, M.J. and K.E. Wagner, Material Failures: The Importance of Validating First Impressions, Corrosion Solutions Conference, 2011, Lake Louise, Alberta, Canada.

Casuccio, G., R. Ogle, L. Wahl, and R. Pauer, Worker and Environmental Assessment of Potential Unbound Engineered Nanoparticle Releases, Phase IV Final Report: Environmental Monitoring Plan for Unbound Engineered Nanoparticles, RJ Lee Group, Inc., and Lawrence Berkeley National Laboratory, 2011.

Wolfe, J., J. Aitken and K. Bunker, Content Uniformity in Tablets Evaluated by Energy Dispersive X-ray Spectroscopy, Microscopy & Microanalysis 2011 (Poster), 2011.

Bunker, K., D. McAllister and J. Mastovich, Nanocharacterization of Carbon Nanotube Biosensors for Point-of -Care Diagnostics, Microscopy & Microanalysis 2011 (Poster), 2011.

Ogle, R., G.S. Casuccio, K.L. Bunker and K.P. Rickabaugh, Deployment and Evaluation of the Use of Control Banding for Protecting Researchers and the Environment, Fifth International Symposium on Nanotechnology, Occupational and Environmental Health, Characterization of Airborne Exposure (platform presentation), 2011.

Amemiya, N. Nioradze, P. Santhosh, M.J. Deible, “Generalized Theory for Nanoscale Voltammetric Measurements of Heterogeneous Electron-Transfer Kinetics at Macroscopic Substrates by Scanning Electrochemical Microscopy,” Anal. Chem., 2011, 83 (15), 5928.

Lee, R., “The Rising Phoenix”, RJ Lee Group Inc. Editors Picks, R&D Magazine, Vol. 53(3), 2011.

Wolfe, J. and K. Smith, An Industrial Forensic Approach to Particulate Characterization for Manufacturing and Quality Assurance Investigations, presented at Golden LEAF Biomanufacturing Training and Education Center (BTEC), 2011.

Rickabaugh, K., G. Casuccio, K. Bunker and R. Ogle, Evaluation of the Potential Release of Unbound Engineered Nanoparticles using High-Resolution Electron Microscopy, AIHce 2011 (platform presentation), 2011, .

Huerta, N.J., S.L. Bryant, B.R. Strazisar and et al., “Dynamic Alteration along a Fractured Cement/Cement Interface: Implications for Long-Term Leakage Risk along a Well with an Annulus Defect”, Energy Procedia, Vol. 4, pp. 5398-5405, 2011.

Hawthorne, S.B., D.J. Miller, Y. Holubnyak, J.A. Harju, B.G. Kutchko and B.R. Strazisar, “Experimental Investigations of the Effects of Acid Gas (H2S/CO2) Exposure under Geological Sequestration Conditions”, Energy Procedia, Vol. 4, pp. 5259-5266, 2011.

Bunker, K.L., T. L. Lersch, M. Sparrow, J. L. Sturgeon, Z. Liu, J.C. Yang and G. S. Casuccio, Exploring the Nano World with SEM/STEM, Pittcon 2011 – New Advances in Microscopic Imaging Techniques, Organized Contributed Session, 2011, Atlanta, GA.

Kutchko, B.G., B.R. Strazisar, S.B. Hawthorne and et al., “H2S-CO2 Reaction with Hydrated Class H Well Cement: Acid-Gas Injection and CO2 Co-Sequestration”, International Journal of Greenhouse Gas Control, Vol. 5(4), pp. 880-888, 2011.

Sargent, L., S.H.Reynolds, A.F. Hubbs, S. Benkovic, D. Lowry, M.L. Kashon, K.J. Siegrist, J. Mastovich,, J. Sturgeon, K. Bunker, and C.Z. Dinu, Understanding Carbon Nanotube Genotoxicity, Annual Meeting of the Society of Toxicology, Washington, DC, March 6-11, 2011 (Platform Presentation).

Schwoeble, A.J., B.R. Strohmeier, K.L. Bunker, D.R. McAllister, J.P. Marquis, J.D. Piasecki and N. M. McAllister, “Application of X-ray Photoelectron Spectroscopy (XPS) for the Surface Characterization of Gun Shot Residue (GSR)”, Microscopy Today, Vol. 19(2), pp. 40-45, 2011. DOI: 10.1017/S1551929511000113

Perricone, M.J., J.N. DuPont, T.D. Anderson, C.V. Robino and J.R. Michael, “An Investigation of the Massive Transformation from Ferrite to Austenite in Laser-Welded Mo-Bearing Stainless Steel”, Metallurgical and Materials Transactions A, Vol. 42(3), pp. 700-716, 2011. DOI: 10.1007/s11661-010-0433-x

Committee on Stainless & Heat Resistant Steels (included M.J. Perricone), “Chapter5. Stainless and Heat-Resistant Steels”, AWS Welding Handbook, Materials and Applications Part 1, Vol. 4(9), 2011.

Bhattacharya, S., A. Nayak, V.K. Goel, C. Warren, S. Schlaegle, L. Ferrara, “Gravimetric Wear Analysis and Particulate Characterization of Bilateral Facet-Augmentation System – PercuDyn™”, Bio-Medical Materials and Engineering, Vol. 20(6), pp. 329-338, 2011. DOI: 10.3233/BME-2010-0646.

Spangler, L.H., L. H. Dobeck, K. S. Repasky, B. R. Strazisar and et al., “A Shallow Subsurface Controlled Release Facility in Bozeman, Montana, USA, for Testing Near-Surface CO2 Detection Techniques and Transport Models”, Environmental Earth Sciences , Vol. 60(2), pp. 227-239, 2010.

Kennedy, S.K., S.P. Scheidt and N. Lancaster, Utilization of CCSEM methods to Determine Minor/Accessory Mineral Abundances from Inland Desert Dune Sands of the Gran Desierto, 2010 Annual Meeting and Exposition of the Geological Society of America (GSA), 2010.

Tomsheck, A.R., G.A. Strobel, E. Booth, B. Geary, D Spakowicz, B. Knighton, C. Floerchinger, J. Sears and D. Ezra, “Hypoxylon and Endophye of PerseaIndica, Producing 1, 8-Cieole and Other Volatile Organic Compounds with Fuel Potential”, Microb Ecol. , Vol. 60(4); pp. 903-314, 2010.

Harris, K., K. Wagner and G. Casuccio, Problem Solving Using Computer Controlled Scanning Electron Microscopy, MS&T2010, 2010, Houston, TX.

Sturgeon, J.L., Z. Liu, K. L. Bunker, T. L. Lersch, J. Mastovich, B. R. Strohmeier and J. C. Yang, In Situ Heating, Imaging, and Analysis of Nanoparticles using SEM, STEM, and XPS, American Vacuum Society (AVS) 57th International Symposium & Exhibition, 2010, Albuquerque, NM.

Coz, E., B. Artíñano, L.M. Clark, M. Hernandez, A.L. Robinson, G.S. Casuccio, T.L. Lersch and S.N. Pandis , Characterization of PM2.5 Primary Biogenic Aerosols, the Pittsburgh Air Quality Study, International Aerosol Conference, 2010, Helsinki, Finland.

Casuccio, G., R. Ogle, L. Wahl and R. Pauer, Worker and Environmental Assessment of Potential Unbound Engineered Nanoparticle Releases, Phase III Final Report: Validation of Preliminary Control Band Assignments, RJ Lee Group, Inc. and Lawrence Berkeley National Laboratory, 2010, September 28.

Bhattacharya, S., A. Nayak, V.K. Goel, C. Warren, S. Schlaegle and L. Ferrara, “Gravimetric Wear Analysis and Particulate Characterization of Bilateral Facet-Augmentation System – PercuDyn™”, Bio-Medical Materials and Engineering, Vol. 20(6), pp. 329-338, 2010. DOI: 10.3233/BME-2010-0646

Ren, Y., G. Strobel, J. Sears, B. Geary, P. Vargas, M. Park and J. Starkey, “Geobacillus evitos sp nov., A Thermophilic Soil Bacterium Producing Volatile Antibiotics”, Microb Ecol , Vol. 60(1), pp. 130-136, 2010. DOI: 10.1007/s00248-009-9630-9

Banerjee, D., G.A., Strobel, B. Geary, J. Sears, D. Ezra, O. Liarzi and J. Combs, “Muscodor albus Strain GBA, an Endophytic Fungus of Ginko biloba from the United States of America Produces Volatile Antimicrobials”, Mycology, Vol. 1(3), pp. 179-186, 2010. DOI: 10.1080/21501203.2010.506204

Bunker, K.L., J. L. Sturgeon, T. L. Lersch and J. Wolfe, Nanoparticle Characterization in Life Science Applications Using Electron Microscopy, Microscopy and Microanalysis 2010 Annual Meeting, 2010, Portland, OR.

Bunker, K.L., K.P. Rickabaugh, T.L. Lersch and G.S. Casuccio, Analytical Microscopy Techniques in Support of Nanoparticle Environmental Safety & Health Considerations, invited presentation at Microscopy & Microanalysis, 2010, Portland, OR.

Rickabaugh, K.P. and M.D. Zock, “The Next Generation Lab”, The Synergist, 2010.

Cyrs, W.D., D.A. Boysen, G.S. Casuccio, T.L. Lersch and T.M. Peters, “Nanoparticle Collection Efficiency of Capillary Pore Membrane Filters”, Journal of Aerosol Science, Vol. 41(7), pp. 655-664, 2010. DOI: 10.1016/j.jaerosci.2010.04.007

Coz, E., G.S. Casuccio, A.L. Robinson, T. Moreno, C. Mohr, A.S.H. Prevot and B. Artinano, Structural Characteristics of Internally Mixed Carbonaceous Aggregates from Barcelona (Spain) During DAURE Winter Campaign, EGU General Assembly 2010, 2010, Vienna, Austria.

Norris, J.T., Robino, C.V., Perricone, M.J., Hirschfeld and D.A., “Development of a Time-Resolved Energy Absorption Measurement Technique for Laser Beam Spot Welds”, Welding Journal, Vol. 89(4), pp. 75s-81s, 2010.

Pfefferkorn, F.E., D. Bello, J.-Y. Park, M. Powell, J. McCarthy, K.L. Bunker, G. Gruetzmacher, G. Haddad, A. Fehrenbacher, Y. Jeon, M. D. Hoover, “Characterization of Exposures to Airborne Nanoscale Particles during Friction Stir Welding of Aluminum”, The Annals of Occupational Hygiene, Vol. 54(5), pp. 486-503, 2010. DOI: 10.1093/annhyg/meq037

Lee, R.J., K.A. Allison, K. L. Bunker, K.E. Harris, J.C. Huntington, M.S. Sanchez, B. R. Strohmeier and D. R. Van Orden, The Challenges of Defining and Characterizing Asbestos, presented at the 45th Annual Meeting of the Northeastern Section, GSA, 2010, Baltimore, MD.

Hall, R.J., M.S. Sanchez, and K.P. Rickabaugh, An Evaluation of Fly Ash in Sediment by Microscopy, Tennessee Valley Authority Fly Ash Symposium, 2010, .

Bunker, K.L., J.L.. Sturgeon, J.P. Marquis Jr., T.L. Lersch, K.L. Sutch, J. Wolfe and D. Exline, Use of Nanotechnology Instrumentation for Particle Size, Shape and Morphology in Drug Development, Parenteral Drug Association Annual Meeting, 2010, .

Van Orden, D.R., Asbestos Analytical Methods: Separating Fact From Fiction, presented at the Legal Symposium for the Aggregates Industry, 2010, National Stone, Sand & Gravel Association Meeting.

Casuccio, G.S., Scanning Electron Microscopy (SEM), Computer Controlled SEM and High-Resolution SEM, USAPHC/DRI Mineral Dust Monitoring Initiative (MDMI), presented at Desert Research Institute, 2010, Reno, NV.

Jones, A.D., A. Apsley, S. Clark, J. Addison, D.R. Van Orden and R.J. Lee, “Laboratory Tests to Compare Airborne Respirable Mass and Fibre Concentration from Soil Samples from Libby, Montana”, Indoor and Built Environment, Vol. 19(2), pp. 286-297, 2010. DOI: 10.1177/1420326X09349908

Lee, R.J. and D.R. Van Orden, Common Errors Associated with the Analysis of Tremolitic Talc, presented at the ASTM Michael E. Beard Asbestos Conference, 2010, San Antonio, TX.

Strohmeier, B.R., K.L. Bunker, J.L. Sturgeon, J.D. Piasecki, J.P. Marquis, Jr., T. L. Lersch and K. W. Wagner, Characterization of Nanomaterials Using Advanced FESEM/STEM and XPS Techniques, presented at Pittcon, 2010, Orlando, FL.

Van Orden, D.R., Evaluation of Talc for Asbestos Content, presented at the 2009 Regulatory Science Summit, 2009, Arlington, VA.

Bunker, K.L., T. Lersch, R. Ogle, G.S. Casuccio and L. Wahl, “Unbound Engineered Nanoparticles (UNP) – Evaluation of Unbound Engineered Nanoparticles from a Worker Exposure and Environmental Release Perspective”, 2009. http://AZoNano.com

Casuccio, G.S., R. Ogle, K.L. Bunker, T.L. Lersch and L. Wahl, Evaluation of Unbound Engineered Nanoparticles from a Worker Exposure and Environmental Release Perspective, invited presentation at the American Geophysical Union Fall Meeting, Origins and Behavior of Aerosols in the Atmosphere From Studies of Individual Particles Session, 2009, San Francisco, CA.

Wells, A., B. Strazisar and J. R. Diehl, “Atmospheric Tracer Monitoring and Surface Plume Development at the ZERT Pilot Test in Bozeman, Montana, USA”, Environmental Earth Sciences , Vol. 60(2), pp. 299-305, 2010.

Willis, B., G. Norris, T, Watkins, E. Sawvel, D. Boysen, N. Kumar, T. Peters and G. Casuccio, Characterization of Coarse PM Using Passive Samplers, presented at the 2009 National Ambient Air Monitoring Conference, 2009, Nashville, TN.

Casuccio, G.S., Measuring and Characterizing Engineered Nanoparticles: Implications to Worker Exposure and Environmental Assessment, presented at 2nd USAF ASC/AFRL ESOH Nanomaterials Workshop, Fairborn, OH, November 2009.

Casuccio, G.S., Measuring and Characterizing Engineered Nanoparticles: Implications to Worker Exposure and Environmental Assessment, presented at 2nd USAF ASC/AFRL ESOH Nanomaterials Workshop, 2009, Fairborn, OH.

Strohmeier, B.R., K.L. Bunker and J.D. Piasecki , RJ Lee Group’s Advanced FESEM/STEM and XPS Analytical Services for Exploring the Nano-World, American Vacuum Society 56th International Symposium & Exposition, 2009, San Jose, CA.

Strazisar, B.R., A.W. Wells, J. R. Diehl and et al., “Near-Surface Monitoring for the ZERT Shallow CO2 Injection Project”, International Journal of Greenhouse Gas Control, Vol. 3(6), pp. 736-744, 2009. DOI: 10.1016/j.ijggc.2009.07.005

Casuccio, G.S., Measuring and Predicting Levels of Exposure of Nanomaterials: Macro Micro Nano, presented at National Nanotechnology Initiative, nanoEHS Workshop Series, Nanomaterials and the Environment & Instrumentation, Metrology, and Analytical Methods, 2009, Arlington, VA.

Van Orden, D.R. and M. Sanchez, CARB Definitions of Asbestos, presented at 2009 GSA Annual Meeting, 2009, Portland, OR.

Van Orden, D.R., Evaluation of Raw Materials for Asbestos Content, presented at the 5th Annual Joint Western Regional Mine Safety & Health Conference, 2009, Reno, NV.

Mustonen, O., T.S. Nunney, B.R. Strohmeier, J.D. Piasecki and R.J. Lee, Automated XPS Analysis of Passivated Stainless Steel to the SEMI Standard, presented at the 13th European Conference on Applications of Surface and Interface Analysis, Antalya, Turkey, and presented at the American Vacuum Society 56th International Symposium & Exposition, 2009, San Jose, CA.

Strohmeier, B.R., J.D. Piasecki, K.L. Bunker and J.L. Sturgeon, XPS and FESEM/STEM Surface Characterization of Activated Carbon, Carbon Black, and Carbon Nanotubes, presented at the 24th International Activated Carbon Conference, Pittsburgh PA and Presented at Pittcon 2010, Orlando FL, 2009, Pittsburgh.

Casuccio, G., R. Ogle, L. Wahl and R. Pauer, Worker and Environmental Assessment of Potential Unbound Engineered Nanoparticle Releases, Phase II Final Report: Preliminary Control Band Development, RJ Lee Group Inc. and Lawrence Berkeley National Laboratory, 2009.

Casuccio, G., R. Ogle, L. Wahl and R. Pauer, Worker and Environmental Assessment of Potential UNP Releases, Phase I Final Report: Data Collection, RJ Lee Group, Inc. and Lawrence Berkeley National Laboratory, 2009.

Nunney, T., R. White, G.S. Casuccio, K.L. Bunker, B.R. Strohmeier and D.J. Graham , Chemical Characterization of Nanostructured Materials using X-ray Photoelectron Spectroscopy, presented at Nanotech Europe 2009, Berlin, Germany.

Strohmeier, B.R., K.L. Bunker, C.L. Lopano, J.P. Marquis, Jr., J.D. Piasecki, K.E. Bennethum, R.G. White, T.S. Nunney and R.J. Lee, XPS and SEM/STEM Characterization of Silver Nanoparticles Formed from the X-ray-Induced and Thermal Reduction of Silver Behenate, presented at Microscopy and Microanalysis Annual Meeting, July 2009, Richmond, VA, and presented at the American Vacuum Society 56th International Symposium and Exposition San Jose, TX, 2009, Richmond, VA.

McCarthy, J.J., F.E. Pfefferkorn, D. Bello, G. Haddad and and K.L. Bunker, Electron Microscopy and EDS of Nanoparticles Generated During Friction Stir Welding, Microscopy and Microanalysis Annual Meeting: Microscopy and Microanalysis of Nanostructured Materials, 2009, Richmond, VA.

Rickabaugh, K.P., Professional Judgment and Exposure Modeling Strategies – A Test Chamber Method to Measure Respirable Dust for Developing Dust Emission Generation Rates, presented at AIHCE Conference, 2009, .

McCarthy, J.M., F. E. Pfefferkorn, D. Bello, M. Powell, G. Haddad and K.L. Bunker, Nanoparticles Generated by Friction Stir Welding: First EM/EDS Results, presented at the Electron Microscopy & Microanalysis Workshop: Problem Solving in the Nanotechnology World, June 2009; and presented at MAS Topical Conference: Microanalysis of Particles, College of Microscopy/ McCrone Associates, Westmont, IL, 2009, .

Cyrs, W.D., D.A. Boysen, G. Casuccio, T. Lersch and T.M. Peters, Nanoparticle Collection Efficiency to the Surface of Polycarbonate Filters, presented at American Industrial Hygiene Conference & Exposition 2009, 2009, Toronto, Ontario.

Coz, E., F.J. Gomez-Moreno, G.S. Casuccio and B. Artinano, Morphology and Elemental Composition of Mineral Dust Particles from Local Regional and Long-Range Transport Meteorological Scenarios, presented at the 12th EuCheMS International Conference on Chemistry and the Environment, 2009, Stockholm, Sweden.

Casuccio, G.S., The Past, Present and Future of Computer Controlled Scanning Electron Microscopy (CCSEM), presented at the Electron Microscopy & Microanalysis Workshop: Problem Solving in the Nanotechnology World, 2009.

Casuccio, G.S., Graded Sampling Approaches for Nanoparticle Safety and Health, presented at the Electron Microscopy & Microanalysis Workshop: Problem Solving in the Nanotechnology World, 2009, .

Strohmeier, B.R., J.D. Piasecki, K.L. Bunker, J.L. Sturgeon, R.G. White and R.J. Lee, X-ray Photoelectron Spectroscopy (XPS): The Original Nano-Analytical Technique for Materials Surface Characterization, presented at the Electron Microscopy & Microanalysis Workshop: Problem Solving in the Nanotechnology World, 2009, .

Kutchko, B.G., B.R. Strazisar, N. Huerta and et al., “CO2 Reaction with Hydrated Class H Well Cement under Geologic Sequestration Conditions: Effects of Flyash Admixtures”, Environmental Science & Technology, Vol. 43(10), pp. 3947-3952, 2009. DOI: 10.1021/es803007e

Spangler, L. H., L. M. Dobeck, K. Repasky, A. Nehrir, S. Humphries, J. Barr, C. Keith, J. Shaw, J. Rouse, A. Cunningham, S. Benson, C. M. Oldenburg, J. L. Lewicki, A. Wells, R. Diehl, B. Strazisar, J. Fessenden, T. Rahn, J. Amonette, J. Barr, et al., “A Controlled Field Pilot for Testing Near-Surface CO₂ Detection Techniques and Transport Models,” Energy Procedia, 1(1), 2143-2150, 2009.

Huerta, N.J., S.L. Bryant, B.R. Strazisar, B.G. Kutchko and L.C. Conrad, “The Influence of Confining Stress and Chemical Alteration on Conductive Pathways within Wellbore Cement”, Energy Procedia, Vol. 1(1), pp. 3571-3578, 2009. DOI: 10.1016/j.egypro.2009.02.151

Strazisar, B., B. Kutchko and N. Huerta, “Chemical Reactions of Wellbore Cement Under CO2 Storage Conditions: Effects of Cement Additives”, Energy Procedia, Vol. 1(1), pp. 3603-3607, 2009. DOI: 10.1016/j.egypro.2009.02.155

Bunker, K.L., T. Lersch, J.P. Marquis, B.R. Strohmeier and G.S. Casuccio, Nanoparticle Characterization using Advanced SEM/STEM Instrumentation, presented at MAS Topical Conference: Microanalysis of Particles 2009, College of Microscopy/ McCrone Associates, Westmont, IL, April 2009; and presented at American Vacuum Society 56th International Symposium & Exposition, 2009, San Jose, CA.

Engelbrecht, J.P., E.V. McDonald, J.A. Gillies, R.K.M. Jayanty, G.S. Casuccio and A.W. Gertler, “Characterizing Mineral Dusts and Other Aerosols from the Middle East – Part 2: Grab Samples and Re-Suspensions”, Inhalation Toxicology, Vol. 21(4), pp. 327 – 336, 2009. DOI: 10.1080/08958370802464299

Engelbrecht, J.P., E.V. McDonald, J.A. Gillies, R.K.M. Jayanty, G.S. Casuccio and A.W. Gertler, “Characterizing Mineral Dusts and Other Aerosols from the Middle East – Part I: Ambient Sampling”, Inhalation Toxicology, Vol. 21(4), pp. 297-326, 2009. DOI: 10.1080/08958370802464273

Gunter, M.E. and M. S. Sanchez, “Amphibole Forensics: Using the Composition of Amphiboles to Determine Their Source, the Libby, Montana Example”, American Mineralogist, Vol. 94(5-6), pp 837-840, 2009. DOI: 10.2138/am.2009.3224

Coz, E., F.J. Gomez-Moreno, M. Pujadas, G.S. Casuccio, T.L. Lersch and B. Artinano, “Individual Particle Characteristics of North African Dust under Different Long-Range Transport Scenarios”, Atmospheric Environment, Vol. 43, pp.1850-1863, 2009. DOI: 10.1016/j.atmosenv.2008.12.045

Edgerton, E.S., G.S. Casuccio, R.D. Saylor, T.L. Lersch, B.E. Hartsell, J.J. Jansen and D.A. Hansen, “Measurements of OC and EC in Coarse Particulate Matter in the Southeastern United States”, Journal of the Air & Waste Management Association, Vol. 59(1), pp. 78-90, 2009. DOI: 10.3155/1047-3289.59.1.78

Casuccio, G.S., T.L. Lersch, K.L. Bunker and B.S. Strohmeier, Advanced Analytical Microscopy Techniques for the Characterization of Ambient Particulate Matter Collected From Military Bases in the Middle East, presented at American Geophysical Union Fall Meeting, 2008, San Francisco, CA.

Bunker, K.L., D. McAllister, K.A. Allison, K.Wagner, K.P. Rickabaugh, A.M. Levine, B.R. Strohmeier and R.J. Lee, TEM and FESEM: The Right Combination for Enhanced Particle Characterization, presented at the Microscopy & Microanalysis 2008 Meeting, Albuquerque, NM, August 2008; and presented at the Hitachi/ORNL Workshop on Advanced Electron Microscopy in Materials Science, Oak Ridge, TN, November 2008., 2008, Oak Ridge National Laboratory.

Kutchko, B.G., B.R. Strazisar, G. V. Lowry and et al., “Rate of CO2 Attack on Hydrated Class H Well Cement under Geologic Sequestration Conditions”, Environmental Science & Technology , Vol. 42(16), pp. 6237-6242, 2008. DOI: 10.1021/es800049r

Strohmeier, B.R., K.L. Bunker, K.E. Harris, R. Hoch and R. J. Lee, “Complimentary TEM and FESEM Characterization of Amphibole Particles in Mixed Mineral Dust from Libby, Montana, U.S.A.”, The Microscope 2007; and presented at Inter/Micro 2008, Chicago, IL, Vol. 18(6), pp. 524-530, 2008. DOI: 10.1177/1420326X09341518

Ross, M., A.M. Langer, G.L. Nord, R.P. Nolan, R.J. Lee, D.R. Van Orden and J. Addison, “The Mineral Nature of Asbestos”, Regulatory Toxicology and Pharmacology, Vol. 52, pp. S26-S30, 2008. DOI: 10.1016/j.yrtph.2007.09.008

Lee, R.J. and D.R. Van Orden, “Airborne Asbestos in Buildings”, Regulatory Toxicology and Pharmacology, Vol. 50(2), pp. 218-225, 2008. DOI: 10.1016/j.yrtph.2007.10.005

Sanchez, M.S., R.J. Lee and D.R. Van Orden, “Extinction Characteristics of Six Tremolites with Differing Morphologies”, Microscope, Vol. 56(1), pp. 13-27, 2008.

Gunter, M.E., K.E. Harris, K.L. Bunker, R.K. Wyss and R.J. Lee. , “Amphiboles Between the Sheets: Observations of Interesting Morphologies by TEM and FESEM”, Eur. J. Mineral, Vol. 20(6), pp. 1035-1041, 2008. DOI: 10.1127/0935-1221/2008/0020-1872

Huntington, J.C., B. Clark, J. Ptasienski, K.L. Bunker, B.R. Strohmeier and R.J. Lee, “A New Method for Fracturing Mineral Particles for Cross-Sectional FESEM Analysis”, Periodico di Mineralogia, Vol. 77(2), pp. 43-50, 2008. DOI: 10.2451/2008PM0012

Cohen, H.J. and D. R. Van Orden, “Asbestos Exposures of Mechanics Performing Clutch Service on Motor Vehicles”, Journal of Occupational and Environmental Hygiene, Vol. 5 (3), pp. 148-156, 2008. DOI: 10.1080/15459620701853227

Coz, E., B. Artinano, A.L. Robinson, G.S. Casuccio, T.L. Lersch and S.N. Pandis, “Individual Particle Morphology and Acidity”, Aerosol Science and Technology, Vol. 42(3), pp. 224-232, 2008. DOI: 10.1080/02786820801958759

Lee, R.J., B.R. Strohmeier, K.L. Bunker, M. Sanchez and D.R. Van Orden, The Challenge of Naturally Occurring Asbestos – Characterization of Amphibole Particles in Mixed Mineral Dust, presented at the Roy J. Shlemon Specialty Conference on the Geological Assessment of Naturally Occurring Hazardous Substances, AEG Foundation and Association of Environmental & Engineering Geologists, 2008, Folsom, CA.

Lee, R.J., B.R. Strohmeier, K.L. Bunker and D.R. Van Orden, “Naturally Occurring Asbestos – A Recurring Public Policy Challenge”, Journal of Hazardous Materials, Vol. 153(1-2), pp. 1-21, 2008. DOI: 10.1016/j.hazmat.2007.11.079

Norris, J., M.J. Perricone, R. A. Roach, K. Faraone and C. Ellison, Evaluation of Weld Porosity in Laser Beam Seam Welds: Optimizing Continuous Wave and Square Wave Modulated Processes, presented to 26th Annual International Congress on Applications of Lasers and Electro-Optics, Orlando, FL, 2007.

Strohmeier, B.R., K.L. Bunker, K.E. Harris, R. Hoch and R.J. Lee, “The Database Solution to Particle-by-Particle Analysis of Mixed Mineral Dust”, Microscopy Today, Vol. 15(6), pp. 44-47, 2007. DOI: 10.1017/S1551929500061976

Susan, D.F., C.V. Robino, J.R. Michael, B. McKenzie and M.J. Perricone, Diffusion and Phase Transformation During Glass-to-Metal Joining of Austenitic Stainless Steels, presented at the 19th Annual Rio Grande Symposium on Advanced Materials, 2007, Albuquerque, NM.

Knorovsky, G.A., J. Norris and M.J. Perricone, Shear Testing of Laser Spot Welds, Poster presentation at the 26th Annual International Congress on Applications of Lasers and Electro-Optics, 2007, Orlando, FL.

Strohmeier, B.R., K.L. Bunker, K.E. Harris, R. Hoch and R.J. Lee, The Database Solution to Particle-by-Particle Analysis of Mixed Mineral Dust, poster presentation at 2007 Microscopy and Microanalysis, 2007, Fort Lauderdale, FL.

Susan, D.F., M. J. Perricone, C. V. Robino, J. R. Michael, B. B. McKenzie and M. Rodriguez, “Alloy Depletion and Martensite Formation During Glass-to-Metal Joining of Austenitic Stainless Steels”, Materials Science and Technology, Detroit, MI, Vol. pp. 417-428, 2007. DOI: 10.1179/1362171812Y.0000000011

Anderson, T.D., M. J. Perricone, J. N. DuPont and A. R. Marder, “The Influence of Molybdenum on Stainless Steel Weld Microstructures”, Welding Journal, Vol. 86(9), pp.281-292, 2007.

Perricone, M.J., C.V. Robino, J.R. Michael, M. Reece, P.S. Duran, D.O. MacCallum, Determining the Critical Cooling Rate for the Massive Transformation from Ferrite to Austenite in Laser Welded Mo-Bearing Stainless Steels, presented at the Materials Science and Techology Conference, Detroit, MI, September 2007.

Brewer, L.N., B.L. Boyce and M.J. Perricone, Electron Back-Scattered Diffraction Characterization of Microstructures in Dynamically Deformed Pb-Sn Solder, presented at the Microscopy & Microanalysis Conference, 2007, Ft. Lauderdale, FL.

Anderson, T.D, J.N. DuPont, M.J. Perricone and A.R. Marder, “Phase Transformations and Microstructural Evolution of Mo-Bearing Stainless Steels”, Metallurgical and Materials Transactions A, Vol. 38A(1), pp. 86-99, 2007. DOI: 10.1007/s11661-007-9211-9

Van Orden, D.R., K. A. Allison and R. J. Lee, “Differentiating Amphibole Asbestos from Non-Asbestos in a Complex Mineral Environment”, Indoor and Built Environment, Vol. 17(1), pp. 58-68, 2007. DOI: 10.1177/1420326X07087006

Wells, A.W., J.R. Diehl, G. Bromhal, B.R. Strazisar, T.H. Wilson and C.M. White, “The Use of Tracers to Assess Leakage from the Sequestration of CO2 in a Depleted Oil Reservoir, New Mexico, USA”, Applied Geochemistry, Vol. 22(5), pp. 996-1016, 2007. DOI: 10.1016/j.apgeochem.2007.01.002

Kutchko, B.G., B.R. Strazisar, D.A. Dzombak and et al., “Degradation of Well Cement by CO2 under Geologic Sequestration Conditions”, Environmental Science & Technology , Vol. 41(13), pp. 4787-4792, 2007. DOI: 10.1021/es062828c

Howard, R.M., P. Guerrero, D.B. McGrath and D.R. Van Orden, “The EPA’s Prosecution of Clean Air Act Asbestos NESHAP Cases Based Upon Nonbinding Bulk Material Test Methods”, San Diego Law Review, Vol. 44(2), pp. 173-230, 2007.

Brown, R.S., W.R. Boltin, B.R. Bandli and J.R. Millette, “Light and Electron Microscopy of Mineral Wool Fibers”, The Microscope, Vol. 55, pp. 37-44., 2007.

Iezzi, G., G. Della Ventura, F. Bellatreccia, S. Lo Mastro, B.R. Bandli and M.E. Gunter, “Site Occupancy in Richterite-winchite from Libby, Montana, USA by FTIR OH-stretching spectroscopy”, Mineralogical Magazine, Vol. 71(1), pp. 93-104., 2007. DOI: 10.1180/minmag.2007.071.1.93

Richardson, M.S., P.J. DeMott, S.M. Kreidenweis, D. Cziczo, E.J. Dunlea, J.L. Jimenez, D. Thomson, L. Ashbaugh, R.D. Borys, D. Westphal, G. Casuccio, T. Lersch, “Measurements of Heterogeneous Ice Nuclei in the Western United States in Springtime and Their Relation to Aerosol Characteristics”, Journal of Geophysical Research, Vol. 112(2), 2007. DOI: 10.1029/2006JD007500

Perricone, M.J., T.D. Anderson, J.R. Michael, C.V. Robino and J.N. DuPont, “Eutectoid Formation of Sigma During Single Pass Arc Welds in Mo-Bearing Stainless Steels”, Metallurgical and Materials Transactions A, Vol. 38A(9), pp. 1976-1990, 2007. DOI: 10.1007/s11661-007-9158-x

Lee, R.J., G.A. Bowman, B.R. Strohmeier and D.R. Van Orden, Limitations of Current Analytical Protocols as They Relate to Public Policy: The Libby Montana Puzzle, presented at the Annual Conference of the American Industrial Hygiene Association, 2007.

Van Orden, D.R., D. B. McGrath, R. M. Howard and P. Guerrero, “Applicable Polarized Light Microscopy Method for Asbestos NESHAP Compliance Testing”, Microscope, Vol. 55(2), pp. 75-80, 2007.

Andreozzi, A., P. Ballirano, B.M. Bruni, A. Gianfagna, M.E. Gunter, S. Mazziotti-Tagliani, A. Pacella, L. Paoletti, R.J. Lee, D.R. Van Orden, and K.A. Allison, Fibrous Amphiboles from Biancavilla: Crystal Chemistry, Environmental Aspects, and Health Studies, RiMG Amphiboles Short Course, Rome, Italy, 2007.

Anderson, T.D, J.N. DuPont, M.J. Perricone, A.R. Marder, “Phase Transformations and Microstructural Evolution of Mo-Bearing Stainless Steels”, Metallurgical and Materials Transactions A, Vol. 38A, 1, pp. 86-99, 2007.

Harris, K.E., K.L. Bunker, B.R. Strohmeier, R. Hoch and R.J. Lee, Discovering the True Morphology of Amphibole Minerals: Complimentary TEM and FESEM Characterization of Particles in Mixed Mineral Dust, Modern Research and Educational Topics in Microscopy, Formatex Research Center, Bajadoz, Spain, Vol. 3(2), pp. 643-650, 2007.

Van Orden, D.R., Asbestos, Environmental Forensics: Contaminant Specific Guide, Academic Press, 2007.

Clark, B.A., L.L. Lockrem, G.A. Cooke, M. Avila, R. Westberg, M.R Silsbee and R.J. Lee, Hanford Site Cement-Based Waste Stream Solidifiction Studies, presented at the Cementitious Materials for Waste Treatment, Disposal, Remediation and Decommissioning Workshop, 2006, Aiken, SC.

Bandli, B.R. and M.E. Gunter, “A review of Scientific Literature Examining the Mining History, Geology, Mineralogy, and Amphibole Asbestos Health Effects of the Rainy Creek Igneous Complex, Libby, Montana, USA”, Inhalation Toxicology, Vol. 18, pp. 949-962, 2006. DOI: 10.1080/08958370600834982

Wells, A.W., R.W. Hammack, G.A. Veloski, J.R. Diehl, B.R. Strazisar, T.H. Wilson, H. Rauch and C.M. White, “Monitoring, Mitigation and Verification at Sequestration Sites: SEQURE Technologies and the Challenge for Geophysical Detection”, The Leading Edge, Vol. 25(10) pp. 1264-1270, 2006. DOI: 10.1190/1.2360618

Lee, R.J., G.A. Bowman, B.R. Strohmeier and D.R. Van Orden, Naturally Occuring Asbestos: An Alternate Analysis, poster presented at the 2006 Annual Meeting of the Geological Society of America, 2006, Philadelphia, PA.

Perricone, M.J., T.D. Anderson, J.N. DuPont and C.V. Robino, On the Massive Transformation from Ferrite to Austenite in Laser Welded Mo-Bearing Stainless Steels, Joining of Advanced and Specialty Materials Including Affordable Joining of Titanium and Joining Technologies for MMCs, Materials Science and Technology, Cincinnati, OH., 2011.

Sanchez, M.S., M.E. Gunter, M.D. Dyar, S.R. Badger, G.C. Hobbs, D.R. Van Orden and M.S. Potter, Characterization of Historical Amphibole Samples from the Former Vermiculite Mine Near Libby, Montana USA, presented at the Geological Society of America, 2006, Philadelphia, PA.

Perricone, M.J., T.D. Anderson, C.V. Robino, J.R. Michael and J.N. DuPont, Predicting Sigma Formation in Mo-Bearing Stainless Steel Welds, presented at Rio Grande Symposium on Advanced Materials, 2006, Albuquerque, NM.

Norris, J.T., M.J. Perricone, K.M. Faraone and C.N. Ellison, Porosity Characterization for Nd:YAG CW Laser Welds: Investigating the Effect of Square Wave Modulation, presented at AWS Conference and Exposition, 2006, Atlanta, GA.

Perricone, M.J., C.V. Robino, M. Reece and P.S. Duran, Controlling Massive Transformations in Laser Welded Stainless Steels, presented at AWS Conference and Exposition, 2006, Atlanta, GA.

Perricone, M.J., T.D. Anderson, C.V. Robino, J.R. Michael and J.N. DuPoint, Predicting Sigma Formation in Mo-Bearing Stainless Steels, presented to the AWS Conference and Exposition, 2006, Atlanta, GA.

Anderson, T.D., M.J. Perricone and J.N. Dupont, Joining of Superaustenitic Stainless Steels – A New Approach, Joining of Advanced and Specialty Materials Including Affordable Joining of Titanium and Joining Technologies for MMCs, Materials Science and Technology, Cincinnati, OH., 2006.

Story, S.R., S.M. Goldsmith, R.J. Fruehan, G.S. Casuccio, M.S. Potter and D.W. William, “A Study of Casting Issues Using Rapid Inclusion Identification and Analysis”, Iron & Steel Technology, Vol. 3(9), pp. 52-62, 2006.

Perricone, M.J., M.J. Martine, J.T. Norris, C.V. Robino and R.A. Roach, Modeling Fluid Dynamics in Stainless Steel Laser Weld Fusion Zones to Predict Weld Penetration and Porosity Formation, Poster presentation, Gordon Research Conference on Physical Metallurgy, 2006, Plymouth, NH.

Leith, D., T. Merrifield, B. Willis, T. Conner, M. Boundy, J. Wagner, G. Casuccio and T. Peters, Passive Aerosol Sampler for PM_10-2.5, presented at AWMA Specialty Conference Symposium on Air Quality Measurements and Technology, 2006, Durham, NC.

Wagner, J., D. Leith, G.S. Casuccio, T. Merrifield, T. Peters and B. Willis, Passive Aerosol Sampler for Characterization, Ambient Concentration, and Particle Size Measurement, presented at AWMA Specialty Conference Symposium on Air Quality Measurements and Technology, 2006, Durham, NC.

Perricone, M.J. and J.N. DuPont, “Effect of Composition on the Solidification Behavior of Several Ni-Cr-Mo and Fe-Ni-Cr-Mo Alloys”, Metallurgical and Materials Transactions A., Vol. 37(4), pp. 1267-1280, 2006. DOI: 10.1007/s11661-006-1078-7

Bandli, B.R., “Seeing Red: How to Compensate for Color Vision Confusion in Microscopy”, Lab Manager Magazine, Vol. 1(4), pp. 45-46, 2006.

Willis, B., D. Leith, T. Merrifield, J. Wagner, G.S. Casuccio, C. Cowley, T. Conner and T. Peters, Evaluation of PM10, PM2.5, Measurements using a Passive Particulate Sampler, presented at AWMA Specialty Conference Symposium on Air Quality Measurements and Technology, 2006, Durham, NC.

Van Orden, D., R. Lee, S. Badger and G. Hobbs, The Importance of Correct Minerals Identification: Application of Mineral Identification to Asbestos Analyses, presented at the Industrial Minerals Association Meeting, 2006, Pittsburgh, PA.

Van Orden, D.R., R.J. Lee and S.R. Badger, “Characterizing Asbestos Fiber Comminution Resulting from Preparation of Environmental Samples”, Powder Technology, Vol. 162(3), pp. 183-189, 2006. DOI: 10.1016/j.powtec.2005.12.015

Perricone, M.J., “Advanced Milling Technology Helps Identify Phase Transformations”, Welding Journal, Vol. 84(10), pp. 44-49, 2005.

Atteridge, D., M. Avila, V. Baca, S. Stevens, R. Westberg, K.M. Bishop, G.A. Cooke, L.L. Lockrem, B.A. Clark, R.J. Lee, M.Silsbee, Development of a Cast Stone Formulation for Hanford Tank Wastes, presented at the RemTech 2005 Symposium, Alberta, Canada, October 2005.

Avila, M., G.A. Cooke, L.L. Lockrem, G.L. Koci, M.D. Guthrie, K.J. Lueck, B. Clark, R.J. Lee, M. Silsbee, Development of Waste Forms for the Hanford Brines Basin 42 Waste Water & WTP Secondary Wastes & Bulk Vitrification Secondary Waste, presented at the RemTech 2005 Symposium, Alberta, Canada, 2005.

Leith, D., J. Wagner, T. Peters, G.S. Casuccio and T. Merrifield, Passive Sampler for Aerosol Particles, presented at EPA CASAC Committee, 2005.

Melnick, F., H. Bhattacharjee and R.J. Lee, The Role of Sample Collection and Scanning Electron Microscopy (SEM) in Contaminant Analysis in Hospital Pharmacies, A Pictorial Presentation, Microscopy and Microanalysis Conference, 2005, Honolulu, HI.

Badger, S.R., C.C. Bunker, R.J. Lee, M.S. Matyjaszczyk, K.P. Rickabaugh and A.F. Vicinie, Contamination and Recontamination of Buildings Around Ground Zero, presented at Pittcon. Orlando, FL, 2005.

Casuccio, G.S., T. L. Lersch, S. F. Schlaegle, R. Devlin and B. M. Ray, Evaluation of Coarse Fine and Ultrafine Particles as Part of a Health Effects Exposure Study, presented at American Association for Aerosol Research, 2005.

Casuccio, G., T. Lersch, S. Schlaegle, A. Robinson and E. Weitkamp, Characterization and Speciation of Bioaerosols and Vehicular Fuel Combustion Emissions using Electron Microscopy, presented at American Association of Aerosol Research, 2005.

Anderson, T.D., M. J. Perricone and J. N. DuPont, Development of Filler Metals for Super Austenitic Stainless Steels, 7th International Conference on Trends in Welding Research, ASM Trends in Welding Research Conference, 2005, Pine Mountain, GA.

Anderson, T.D., M.J. Perricone, J.N. DuPont, Alloy Development of an Fe-Based Filler Metal for Welding Superaustenitic Stainless Steel Advanced Double Hull Combatants, presented at the AWS Conference and Exposition, Dallas, TX, 2005.

Allen, D.E., B.R. Strazisar, Y. Soong and et al., “Modeling Carbon Dioxide Sequestration in Saline Aquifers: Significance of Elevated Pressures and Salinities”, Fuel Processing Technology, Vol. 86(14-15), pp. 1569- 1580, 2005. DOI: 10.1016/j.fuproc.2005.01.004

Bunker, K.L., R. Garcia and P.E. Russell, “Scanning Electron Microscopy Cathodoluminescence Studies of Piezoelectric Fields in an InGaN Quantum-Well Light-Emitting Diode, GaN, AIN, InN and Their Alloys”, Applied Physics Letters, Vol. 86(8), pp. 1-3, 2005.

Van Orden, D.R., R.J. Lee and K.A. Allison, A Review of the Analysis of Amphibole Fibers, presented at the 2005 SME Meeting , 2005, Salt Lake City, UT.

Leith, D., J. Wagner, T. Peters, G. S. Casuccio and T. Merrifield, Collection and Characterization of PM2.5, PM10 and PMC Particles Using a Passive Air Sampler, presented at AAAR Annual Meeting, 2005, Austin, TX.

Smith, S., R. Fruehan, G.S. Casuccio, M. Potter and T. Lersch, Application of Rapid Inclusion Identification and Analysis, presented at Iron & Steel Technology, AISTech, 2004.

Perricone, M.J., “Massive Transformation Structures”, ASM Handbook, Metallography and Microstructures, Vol. 9, pp. 148-151, 2004.

White, C.M., B.R. Strazisar, E.J. Granite, J.S. Hoffman and H. Pennline, “Separation and Capture of CO2 from Large Stationary Sources and Sequestration in Geological Formations – Coalbeds and Deep Saline Aquifers”, Journal of Air & Waste Manage. Assoc., Vol. 53, pp. 645-715, 2003.

Strazisar, B.R., R.R. Anderson and C.M. White, “Degradation Pathways for Monoethanolamine in a CO2 Capture Facility”, Energy & Fuels, Vol. 17, pp. 1034-1039, 2003.

Casuccio, G.S., T.L. Lersch, S.F. Schlaegle and D.V. Martello, “Characterizations of Ambient Carbonaceous Particles Using Electron Microscopy Techniques”, Fuel Chemistry Division Preprints, Vol. 47(2), pp. 624, 2002.

Anderson, R.R., D.V. Martello, P.C. Rohar, B.R. Strazisar, J.P. Tamilia, K.Waldner, C.M. White, WK. Modey, N.F. Mangelson and D.J. Eatough, “Sources and Composition of PM2.5 at the National Energy Technology Laboratory in Pittsburgh during July and August 2000”, Energy & Fuels, Vol. 16, pp. 261-269, 2002.

Strazisar, B.R., C. Lin and H.F. Davis, “Vibrationally Inelastic Scattering of High-n Rydberg H Atoms from N2 and O2”, Physical Review Letters, Vol. 86(18), pp. 3997-4000, 2001. DOI: 10.1103/PhysRevLett.86.3997

Strazisar, B.R., C. Lin and H.F. Davis, “Mode Specific Energy Disposal in the 4-Atom Reaction OH + D2 →HOD + D”, Science, Vol. 290(5493), pp. 958-961, 2000. DOI: 10.1126/science.290.5493.958

Bernard, E.J., B.R. Strazisar and H.F. Davis, “Excited State Dynamics of H2CN Radicals”, Chem. Phys. Lett. , Vol. 313, pp. 461-466, 1999. DOI: 10.1016/S0009-2614(99)01062-3

Balabai, N., A. Sukharevsky, I. Read, B. Strazisar, M. Kurnikova, R.S. Hartman, R.D. Coalson, and D.H. Waldeck, “Rotational diffusion of organic solutes: The role of dielectric friction in polar solvents and electrolyte solutions” J. Mol. Liq., Vol. 77(1-3), pp. 37-60, 1999. DOI: 10.1016/S0167-7322(98)00067-1

Monaco, S.J. and E.I. Ko, “The Puzzle of Sol-Gel Catalysts”, CHEMTECH, Vol. 28(6), pp. 23-30, 1998.

Monaco, S.J. and E.I. Ko, “Preparation of Silica and Alumina Single Oxides from Commercial Preformed Sols”, Chemistry of Materials (Special Issue: Sol-Gel Derived Materials), Vol. 9(11), pp. 2404-2417, 1997. DOI: 10.1021/cm970271h

Graf, G., D.H. Ewert and B. Mayo, Conformational Dynamics of Carbonic Anhydrase II.  In a Solution State as Probed by the Positron Lifetime Technique, Annals of the New York Academy of Sciences, Vol. 429, pp. 149-151, 1984.

Graf, G., J.C. Glass, D.H. Ewert and B.A. Mayo, Positrons In Bimolecular Systems I: Proteins, Proceedings of the Sixth International Conference on Positron Annihilation, sponsored by the International Union of Pure and Applied Physics and American Physical Society, pp. 928-929. , 1982.

Glass, J.C., G. Graf, H. Costabal, D.H. Ewert and L.H. English, Positrons In Bimolecular Systems II: Membranes, Proceedings of the Sixth International Conference on Positron Annihilation, sponsored by the International Union of Pure and Applied Physics and American Physical Society, pp.  930-931. , 1982.