Matthew J. Perricone, Ph.D.

Articles by Matthew J. Perricone, Ph.D.:

Grain Boundary Corrosion of Alloy C-276 using Orientation Imaging via Electron Backscatter Diffraction Microscopy (EBSD)

Analytical Equipment

Metals & Alloys

Sensitization Behavior of Alloy C-276 as a Function of Mu Precipitation

Metals & Alloys

Stress Corrosion Cracking

Materials Insights - Metals and Alloys

Materials Science Bridges the Gap between Catastrophic Event and its Root Cause

Case Studies - Construction Materials

Construction Materials

New ASTM Adult Jewelry Standard Treats Adults Like Children

Consumer Products

Metals & Alloys

CPSC’s Decision on Cadmium in Toy Jewelry – Solubility and Accessibility Matter

Consumer Products

Metals & Alloys

Drywall Safety Act of 2012: Increases Regulations on U.S. Manufacturers, but May Not Improve Safety

Case Studies - Construction Materials

Construction Materials

Consumer Products

Opportunities to Improve Oil and Gas Well Barrier Stewardship

Mining & Minerals

Accelerated Alloy Development: Nuclear Power Generation Technology Depends on the Reliability of High Performance Alloys to Operate in Severe Service Environments

Material Failures: The Importance of Validating First Impressions

An Investigation of the Massive Transformation from Ferrite to Austenite in Laser-Welded Mo-Bearing Stainless Steel

Stainless and Heat-Resistant Steels (Chapter 5)

Development of a Time-Resolved Energy Absorption Measurement Technique for Laser Beam Spot Welds

Evaluation of Weld Porosity in Laser Beam Seam Welds: Optimizing Continuous Wave and Square Wave Modulated Processes

Diffusion and Phase Transformation During Glass-to-Metal Joining of Austenitic Stainless Steels

Shear Testing of Laser Spot Welds

Alloy Depletion and Martensite Formation During Glass-to-Metal Joining of Austenitic Stainless Steels

The Influence of Molybdenum on Stainless Steel Weld Microstructures

Determining the Critical Cooling Rate for the Massive Transformation from Ferrite to Austenite in Laser Welded Mo-Bearing Stainless Steels

Electron Back-Scattered Diffraction Characterization of Microstructures in Dynamically Deformed Pb-Sn Solder

Asbestos: By Any Other Name, Is It Still?

Mining & Minerals

Eutectoid Formation of Sigma During Single Pass Arc Welds in Mo-Bearing Stainless Steels

Phase Transformations and Microstructural Evolution of Mo-Bearing Stainless Steels

On the Massive Transformation from Ferrite to Austenite in Laser Welded Mo-Bearing Stainless Steels

Predicting Sigma Formation in Mo-Bearing Stainless Steel Welds

Porosity Characterization for Nd:YAG CW Laser Welds: Investigating the Effect of Square Wave Modulation

Controlling Massive Transformations in Laser Welded Stainless Steels

Predicting Sigma Formation in Mo-Bearing Stainless Steels

Joining of Superaustenitic Stainless Steels – A New Approach

Modeling Fluid Dynamics in Stainless Steel Laser Weld Fusion Zones to Predict Weld Penetration and Porosity Formation

Effect of Composition On the Solidification Behavior of Several Ni-Cr-Mo and Fe-Ni-Cr-Mo Alloys

Advanced Milling Technology Helps Identify Phase Transformations

Development of Filler Metals for Super Austenitic Stainless Steels

Massive Transformation Structures